Bad tools or consumables break at the most inopportune times and yes, in most cases bad = cheap. People like to compare to Snap-On but forget that Snap-On subsidizes their delivery service with the tool cost. Also, yes, Snap-Ons are in fact that much better than HF tools in almost all cases.
Its bad when a $9 HF torque wrench breaks at 8:45PM on a Sunday night when you're under your car putting the transmission back on. Or a cheap pot-metal screw strips when you have a manufacturing deadline approaching.
I've been in the electronics manufacturing industry for 17 years now and in almost all cases, "buy the best you can afford" is the better mantra. That doesn't go bankrupt over a $1500 dollar Snap-On wrench set, but if you buy the HF stuff, you will spend $1500 in time using their warranty.
I think your torque wrench example gets to the point of what I was trying to get at. My torque wrenches are Matco, as are my 'good' sockets. And I have a nice set of Mitutoyo calipers in my box for when I need the precision.
But for an awful lot of the regular work, it's Harbor Freight magnets, HF welding blankets and soapstone, HF clamps, HF grinders. You learn what works best for your dollar, and very often, it's erring not on the side of the more expensive stuff.
Its bad when a $9 HF torque wrench breaks at 8:45PM on a Sunday night when you're under your car putting the transmission back on. Or a cheap pot-metal screw strips when you have a manufacturing deadline approaching.
I've been in the electronics manufacturing industry for 17 years now and in almost all cases, "buy the best you can afford" is the better mantra. That doesn't go bankrupt over a $1500 dollar Snap-On wrench set, but if you buy the HF stuff, you will spend $1500 in time using their warranty.