LiDAR is finally getting cheap. OEMs (like VW) are very price sensitive. It is estimated the sensors from Valeo cost about 500 dollars. The fact that you see more and more normal passenger cars with higher resolution LiDARs means that LiDARs are getting cheaper.
The Audi A8 used Valeo's (with Ibeo) first generation low resolution LiDAR Scala 1 from the automotive supplier Valeo. Mercedes new models will be using Valeo's second (or third) generation LiDAR. All these are used for L2/L3 assistants. Valeo is a traditional large automotive supplier.
Luminar, a public company from the US, cooperates with Volvo. Some models will come with a LiDAR in the base configuration. These are "new LiDARs" with high resolution.
Innoviz, a 'startup' from Isreal, will supplies LiDARs to VW. Its angular resolution is (in its focus area) about 0.1 (or 0.2) degrees, which is sufficient for higher levels of autonomy and surpasses/equals the resolution of the expensive Velodyne sensors of the past. They will probably be in the same price range. Due to the limited FOV due to the technology, you will need multiply LiDARs.
Many new models from Chinese car brands will also ve equipped with a LiDAR. Most of them with Chinese LiDAR manufacturers like RoboSense or Hesai. Some are equipped by European manufactures like Ibeo/ZF. For example, there is the automotive sensor AT128 by Hesai. It targets normals vehicles (see price range above) and claims a similar performance (except for FOV, so you need multiple) like the Velodyne Ultra Puck (~$50000).
So costs of LiDARs are a not the very expensive obstacle they were in the past. The only problem could be that the new LiDAR manufactures cannot scale up series production. For example, Ibeo just filed for insolvency because they could not close another round after aggressively increasing spending in the past years.
The Audi A8 used Valeo's (with Ibeo) first generation low resolution LiDAR Scala 1 from the automotive supplier Valeo. Mercedes new models will be using Valeo's second (or third) generation LiDAR. All these are used for L2/L3 assistants. Valeo is a traditional large automotive supplier.
Luminar, a public company from the US, cooperates with Volvo. Some models will come with a LiDAR in the base configuration. These are "new LiDARs" with high resolution.
Innoviz, a 'startup' from Isreal, will supplies LiDARs to VW. Its angular resolution is (in its focus area) about 0.1 (or 0.2) degrees, which is sufficient for higher levels of autonomy and surpasses/equals the resolution of the expensive Velodyne sensors of the past. They will probably be in the same price range. Due to the limited FOV due to the technology, you will need multiply LiDARs.
Many new models from Chinese car brands will also ve equipped with a LiDAR. Most of them with Chinese LiDAR manufacturers like RoboSense or Hesai. Some are equipped by European manufactures like Ibeo/ZF. For example, there is the automotive sensor AT128 by Hesai. It targets normals vehicles (see price range above) and claims a similar performance (except for FOV, so you need multiple) like the Velodyne Ultra Puck (~$50000).
So costs of LiDARs are a not the very expensive obstacle they were in the past. The only problem could be that the new LiDAR manufactures cannot scale up series production. For example, Ibeo just filed for insolvency because they could not close another round after aggressively increasing spending in the past years.