It is, for all practical purposes, impossible to buy an actual tungsten ring; all sold as "tungsten" are really just tungsten carbide ceramic. Really-pure elemental tungsten is not difficult to machine, unlike common tungsten alloys.
A company near Los Angeles, American Metals, will sell you a 0.99999 pure tungsten boule for a few $thousand. You can ask for it to have a nominal (e.g.) 22 mm outer diameter, and slice it up and core out a collection of rings. The boule melt pattern on the outside is really appealing.
You can sell the rest of the rings, then, provided you can find a way to cut through the noise of the $2 tungsten-carbide hawkers. You might be tempted to paint on a design with resist and electro-plate gold where it isn't.
The scrap you cored out is pretty valuable. Maybe have the cores cut out as discs, instead of just drilling, because the "swarf" would be really hard to melt! They would resemble very heavy, thick coins; you can use a CNC machine to mill designs onto them, if you like.
A company near Los Angeles, American Metals, will sell you a 0.99999 pure tungsten boule for a few $thousand. You can ask for it to have a nominal (e.g.) 22 mm outer diameter, and slice it up and core out a collection of rings. The boule melt pattern on the outside is really appealing.
You can sell the rest of the rings, then, provided you can find a way to cut through the noise of the $2 tungsten-carbide hawkers. You might be tempted to paint on a design with resist and electro-plate gold where it isn't.
The scrap you cored out is pretty valuable. Maybe have the cores cut out as discs, instead of just drilling, because the "swarf" would be really hard to melt! They would resemble very heavy, thick coins; you can use a CNC machine to mill designs onto them, if you like.