Transmissions aren't entirely dead weight; being able to switch gears means you can get away with using a smaller motor than you otherwise would. You also don't need to worry quite so much about getting a motor rated for super high RPM.
Converting something with a manual is probably easier than an automatic (especially if there's some software controlling when to shift the automatic based on some engine sensors which aren't there anymore), but there's no fundamental reason why you couldn't just keep the transmission even in an automatic. Especially if bolting a motor on where the engine was is far simpler than re-engineering half the drive train. (You might be able to get rid of or disable the torque converter, though.)
At this point I think the biggest roadblocks to EV conversion are cost and availability of parts so you don't have to design and build everything from scratch. And I think subsidizing conversions would help with both of these. If there's a big enough market, you might even get reasonably priced kits (possibly from the original vehicle manufacturer) that has everything you need including battery boxes and can be installed by someone who's done it before in less than a week.
(Battery boxes are usually the most difficult and time consuming part of a conversion, since they're usually constructed in an ad-hoc way to fit whatever battery you're using into wherever they would fit. Having something that's actually engineered and possibly even crash tested would be great.)
Converting something with a manual is probably easier than an automatic (especially if there's some software controlling when to shift the automatic based on some engine sensors which aren't there anymore), but there's no fundamental reason why you couldn't just keep the transmission even in an automatic. Especially if bolting a motor on where the engine was is far simpler than re-engineering half the drive train. (You might be able to get rid of or disable the torque converter, though.)
At this point I think the biggest roadblocks to EV conversion are cost and availability of parts so you don't have to design and build everything from scratch. And I think subsidizing conversions would help with both of these. If there's a big enough market, you might even get reasonably priced kits (possibly from the original vehicle manufacturer) that has everything you need including battery boxes and can be installed by someone who's done it before in less than a week.
(Battery boxes are usually the most difficult and time consuming part of a conversion, since they're usually constructed in an ad-hoc way to fit whatever battery you're using into wherever they would fit. Having something that's actually engineered and possibly even crash tested would be great.)