In my experience a one-two punch with chloride to kill the mold quickly, followed by a dousing with distilled white vinegar, results in a good short and long term solution for surface mold.
Safety advice: If you decide to try this at home, please keep in mind that mixing chloride based cleaning agents with an acid will release chlorine, which is toxic enough to have been used as a WW1 weapon.
Chloramine is responsible for the classic "swimming pool smell", as the chlorination in the pool reacts with urine, sweat, and other nitrogen-containing organics. Chloramine is a less effective disinfectant than free chlorine, and more irritating to swimmers, and diffuses out of the water more slowly, so this is why you shouldn't pee in the pool, and why you should rinse off in a shower for a minute before entering. Mainly, just don't pee in the pool.
If you smell "swimming pool" where no pool exists, it might be prudent to leave the area immediately and take a 1000 mg vitamin C tablet, before making any attempts to discover the source of the smell. (Taking vitamin C after the damage is already done won't help.) If the odor is especially strong, or if it causes any irritation to your nose and eyes, evacuate, and do not return. Call your emergency services number and tell them you smelled a strong chlorine odor.
Don't combine bleach cleaners with ammonia cleaners, ever. Don't even store them in the same place. Also avoid mixing bleach with acids, such as vinegar.
Chlorine can react with about anything that contains ammonia or amines to form chloramine, so shampoos, lotions, shaving foams, or conditioners could also be responsible. Amino acids are named thus for their amine groups, so anything containing proteins or protein fragments will react. Amine oxides and triethanolamine are used as surfactants in cosmetics. Sweat is unlikely to be the culprit. Check the ingredients in your cosmetics.
I guess I didn't realize someone would try this without letting the chlorine evaporate first. I should have worded it better: Chloride to kill the mold on contact, let dry, then vinegar to keep the mold away.
