It's an interesting concept. You need more photos - I need to see how the slats interlock, I need to see photos of how the frame works. My immediate thought was that with a long enough desk (de-sk?) it would bow in the middle. A lot of questions I have don't seem to be answered on the landing page. I think overall, the landing page could be simplified and cleaned up so I don't need to go hunting through the "FAQ" and "Why De-sk?" pages to know if this is the desk for me.
As others have pointed out, I think the biggest weakness is the seams. It looks like it would be impossible to write on. I would suggest that you include some sort of optional desk pad as an add-on.
I'm from the US. Although it doesn't look like you're shipping here yet anyway, you might include inch/pound units too if you plan to ship internationally at some point.
Cool concept, good luck.
EDIT: Here's what I meant by a desk pad, in case it wasn't obvious. This one has a lip so that it stays put, and a metal backing so that you wouldn't feel the slats underneath while you were writing: https://www.ikea.com/us/en/catalog/products/40246156/
>It's an interesting concept. You need more photos - I need to see how the slats interlock, I need to see photos of how the frame works. My immediate thought was that with a long enough desk (de-sk?) it would bow in the middle.
He doesn't explain it but it seems pretty clear to me how it might work. The slats don't interlock. Underneath each slat are wooden tabs (one on each end) that fit snugly inside the frame. Each frame is sized to fit a certain number of slats.
And a long desk won't bow in the middle because the slats run the short end of the frame, not the long end.
The long axis of the desk still has a load bearing member that can flex. Presumably if you get a longer desk frame the member would be adjusted (in size or thickness or whatnot) to not bow.
> As others have pointed out, I think the biggest weakness is the seams. It looks like it would be impossible to write on. I would suggest that you include some sort of optional desk pad as an add-on.
I wonder why didn't did use flush cut tongue and groove? You would loss some of the hot swappablity of it current 10cm plywood strips, but it would be even, & more table overall.
> As others have pointed out, I think the biggest weakness is the seams. It looks like it would be impossible to write on. I would suggest that you include some sort of optional desk pad as an add-on.
Or possibly a large "slat" you can put into the middle.
As others have pointed out, I think the biggest weakness is the seams. It looks like it would be impossible to write on. I would suggest that you include some sort of optional desk pad as an add-on.
I'm from the US. Although it doesn't look like you're shipping here yet anyway, you might include inch/pound units too if you plan to ship internationally at some point.
Cool concept, good luck.
EDIT: Here's what I meant by a desk pad, in case it wasn't obvious. This one has a lip so that it stays put, and a metal backing so that you wouldn't feel the slats underneath while you were writing: https://www.ikea.com/us/en/catalog/products/40246156/